Precise share, fine manufacturing, and stop beautification on the basis of reality. Some of them can be artistically disposed, which is both realistic and appreciative... The manufacturing process of sand table model is like a piece of exquisite artwork, which is an amazing art. Therefore, after the sand table model is manufactured, it must be maintained. The following sand table model company will teach you how to maintain the sand table model:
1. During transportation or transfer, the sand table model shall not be directly exposed to the sun, nor be exposed to the sun. The indoor temperature for placing the model shall not exceed 35 degrees Celsius, and the relative humidity shall be 30% to 80%, otherwise the sand table model is prone to degumming and deformation.
2. The room where the sand table model is placed should be clean and ventilated. The model without glass cover should be cleaned frequently. The model should be guarded by a specially assigned person and should not be touched by children to prevent damage.
3. The sand table model controlled by remote control must be carefully kept, and should not be used frequently, otherwise it is easy to constitute a remote control circuit failure.
4. The lights of the sand table model should not be open for a long time, but should be turned off every two hours. If there is a real water fountain, the sand table model should always check whether there is water. If there is a lack of water, water should be added in time. If the fountain does not spray water, the power switch should be closed immediately, otherwise damage will be caused.
5. If you choose a reliable model manufacturing company, they will use good materials, and high-quality sand table models will naturally save much effort in later maintenance.
The sand table model company tells us:
First of all, we should try our best to attach importance to the manufacturing methods of the teacher Fu together with the sand table model manufacturing project. There is a saying that "all changes are inseparable from their ancestors". We should try to figure out how to teach the master instead of trying to learn the skills of each project manufacturing. In addition, we can try our best to see the details on the abandoned model, and spend some time to practice some key parts that we don't touch much.
Many friends know that sand table model manufacturing is a messy project. You can become familiar with it and master it after hard practice and hard study. It will be more exquisite to produce sand table models. When learning to make a sand table, you must choose a respected industry teacher, and you must not give up all your previous efforts. Otherwise, you will not be responsible for yourself, and you will not be able to face the dedication of the mentor. Other sandbox model manufacturing needs to be careful together, and cannot be complacent. As the society is advancing from time to time, the methods and methods of sandbox model manufacturing are constantly emerging.