How to make architectural sketches in the sand table model?
The building sand table model or garden we see Landscape model There will be some architectural sketches to make the finishing point. Architectural sketches are a common part of sand table models. Although the proportion is small, it is indispensable. Common architectural sketches include sculptures, rockeries, leisure facilities, reliefs, etc. So, how should the architectural sketch in the sand table model be made?
1、 When making architectural sketch models, appropriate materials should be selected according to the performance objects, such as:
1. When making sketches of rockeries, different shapes of rockeries can be made with crushed stones or broken plexiglass blocks by bonding, color spraying, etc.
2. When making sculpture sketches, you can use rubber, paper clay, gypsum, iron wire, wood and other plastic materials to stack up to create a sculpture sketch with strong expressiveness and appeal.
3. When sketching other buildings, you can use rubber clay sculptures of various colors to shape them.
4. When making relief architectural sketches, thin copper sheets can be used, but the material should be thin.
2、 Different architectural sketches are made in different ways, such as:
1. The relief model is made of thin copper sheet, which is very vivid. The method is to cut the copper sheet in proportion, draw a pattern on the back of the copper sheet with a wax paper pen, turn it over and stick it to the required position with architectural glue to form a relief model;
2. After the chalk is processed with a carving knife, the statue model can be made with a plexiglass base;
3. You can create various architectural sketch models with various colors of plasticine; 4. Break various absorbent stones used for bonsai into small pieces, and glue them into various shapes with 801 to form a rockery model. This needs to be determined according to the specific sketches made and the materials used.
The above is the method of making architectural sketches in the sand table model. The representation form and depth of architectural sketch in the sand table model depend on the scale of the model and the depth of the main body. Generally speaking, the expression form should be abstract. Because this kind of sketched image is a micro movie, it is unnecessary and impossible to be completely consistent with the real object. Sometimes, this kind of scenery is too concrete, which often causes the shift of human vision. At the same time, it inevitably produces the taste of craftsman spirit. Therefore, when making architectural sketches, we must reasonably select materials, properly use forms of expression, and accurately grasp the depth of production. Only by organically combining the three, can we deal with the production of architectural sketches and achieve the desired effect.