The dazzling sand table model can not lack the setting off of lights. The planning and manufacturing of lights is an important part of the sand table model manufacturing. And the sand table model lights cannot be made without the circuit. So, how are the sand table model lights and circuits made? A small editor gives us a detailed introduction!
1. Sand table model lamp manufacturing:
The lights of the sand table model mainly include the lights inside the building, environment lights, garden lights, street lights, etc. Generally speaking, the building is equipped with lights of different brightness and colors, and the buildings with different functions are divided by lights. Building layered lights; Courtyard lights use beautiful and high brightness appreciating lights, considering the appreciative nature, and the share can be appropriately expanded; Main roads shall be selected for street lights, and bright street lights shall be set at both ends of the journey; The environmental lights should be embedded in green clusters and flower beds with high brightness and colorful floor lights.
2. Sand table model circuit manufacturing:
The light in the sand table model comes from electricity. There are many sources of electric energy, such as batteries, storage batteries and solar cells. The detailed power selection shall be based on the detailed conditions of the model. Generally speaking, the lights in the sand table model are controlled by a remote control device to connect the system. Each remote control key on the remote control controls a specific light zone, such as the 1 # key controls the construction light, and the 2 # key controls the floor light.
The sand table model is mainly composed of basic elements such as landscape topography, garden roads and squares, plants, buildings and phenomenal structures. It is not a simple thing to make these phenomena perfect, accurate and vivid. Therefore, in the aspect of sand table manufacturing, we should try to choose a formal large model company.
First of all, we should do a good job in the building part. The building should be restored to a high degree. It should be manufactured according to the drawings in proportion. The color, structure, and tile by tile should be done well, and should not be ignored. The material and texture of the building walls should be displayed, and the balcony and windows should be well controlled. Architecture is a valuable part of the sand table. A good sand table depends mainly on the architecture. The curve and structure of the architecture are very important.
The second part is the commercial street. The commercial street should do a good job of overall planning. Pay attention to the cars on the street, the supporting equipment of large shopping malls, the parking lot, pedestrians, and the advertising posters of shopping malls. These details also choose the quality of the sand table model. Only by handling the details can the commercial atmosphere be better set off.
The above is about how the lights and circuits of the sand table model are made. The sand table model company introduced us here. The lighting planning needs to rely on the power circuit. When the sand table model is made, holes for the equipment power lines should also be reserved. Generally, transformers or batteries and other equipment are placed inside the chassis, which is more beautiful and generous. Therefore, it is required to weld the holes connecting the power supply and lamps on the site with an electric welder.
