The manufacturing of building models is not well planned. In the manufacturing process, not only high manufacturing skills are required, but also many ingenious layouts are included, making our sand table models vivid and beautiful. How to reasonably arrange the layout of building model manufacturing? Then there is the environment part. The environment contains a very large plan, and there are many things worth paying attention to. On the ground of the journey, trees and trees, wild parks, lakes, pavilions, and Ankang passages, the environment is paved according to the requirements of the project, and some physical buildings are carved on the ground; The beautification should be as realistic as possible. There are concave and convex trees with different types; The ripple effect of the lake surface can participate in the installation of water circulation in the sand table model, and cooperate with the lighting effect to create a sparkling effect.
Finally, the lighting part, including street lights and building lights, should be careful that the lights stay on for a long time, burn out briefly, short circuit, do an inappropriate switch, controlled by a computer program, and turn off the lights every five minutes.
In addition to basic functions and usability, a good product should pay more attention to details and user experience. Therefore, if you want to do a good sand table model, you need to pay attention to all aspects of details and think about it comprehensively.
First of all, it is necessary to clarify the scale of land use to be reflected in the practice of building models. The red line of land use is the center of making plans. Around this center, the surrounding coordinate elements should be properly reflected, such as roads, bridges, landmark buildings, rivers and canals. Guided by these, the customer has a clear understanding of the orientation and connection of building models.
Secondly, the following aspects should be considered in the layout of the construction model scene to be reflected in practice.
1. The main object should be the main scene, and it is forbidden to dominate. It is necessary to reasonably grasp the reasonable relationship between essence and coarseness, and between falsehood and reality. The center or center of gravity of the whole building model should occupy the main perspective.
2. The set off and additional elements can be appropriately exaggerated and omitted. There are many business traps in this part, which is also a valuable part of business planning.
3. No matter how it is handled, it must basically meet the requirements of visual planning skill logic and aesthetic composition, and realistically write the implied connection of the construction model, and the details shall be subject to the documents approved by the relevant government departments. In the end, mastering this degree is the key, and sometimes being honest can get more understanding.