Building model How does the company describe the production of the wall in the building model?
The manufacturing process of building model wall is to copy multiple scale drawings or patterns as the basis for making detailed reliefs or decorations. Cut out the scale drawings of the four walls as templates, and put them together bit by bit to see if the scale is appropriate. Select the wall material, such as tile paper, put the template on it, draw the outline with a pencil, and then cut or cut it according to the outline.
All kinds of paper products can be cut or cut. If you want to cut the foam board, you must use a knife. The blade pulled out is three or four times thicker than the foam board. When cutting, people should stand up and cut with a knife. The blade should be vertical. The knife should cut into the wood at a 45 degree angle. The blade should be hard. In this way, sharp edges can be effectively utilized, and the rubber surface is lengthened to generate thermal friction. The cut foam board edge is not easy to granulate or crack. If you want to copy the herringbone roof with foam board, in addition to repeating the above points, the two boards should also be cut according to the angle of the roof ridge.
Imitate the decoration and decorative patterns of buildings. During processing, rough decoration should be done first, then finish processing. When refining the model, the assembly must discuss the work distribution, and the work must be clear to facilitate the modeling step by step. As the details are mostly embossed patterns, it is advisable to select materials with high plasticity, such as paper mud and clay (clay must be fired, and can also be replaced by clay if conditions do not permit. Frankincense has the advantage of color, but the disadvantage is easy to deform.

For example, on the ridge of the chevron roof of Chinese architecture, there are often convex complex sculptures. When making, you can draw a blueprint to cut out the pattern, then print the outline on the card or rubber tile paper, and then cut out the cardboard. Foam board should not be used because it may be too thick. This practice has only appearance, no exquisite sculpture. The team members can use paper clay to make relief on it, paste it with glue or post it notes, and finish it after coloring.
Another example is Western style buildings, whose wall decoration is more gorgeous than Chinese style buildings. Even windows are often embossed with thick stones. More copies of patterns are required during production, and the work assignment should be clear. If the team members encounter such window lace, they should first cut the whole window and lace of the pattern wall, draw the outline on the transparent film, and then cut the film to make a glass window. Then print the window railing on the patterned cardboard, and then put it on the transparent film, so that the assembly of a window is half completed. After Z, use foam board to cut out rubber particles or rubber plates, create a thick stone effect around the window, and then use tape paper or glue to paste it, basically complete the embossing of transparent windows on the edge of thick stones.