Building model The preservation of a building generally refers to the building model that needs to be preserved after the building is completed. The saving method of the building model can be selected according to the length of the saving period. If the building model is saved for a short time, it can be covered with paper, plastic film or cloth.
If the building model is preserved for a long time, the cover made of plexiglass plate can be used. Make a transparent plexiglass cover according to the three-dimensional specifications of the building model. Cover the building model to prevent dust and decorate the environment. In addition, the following methods can also be used for proper maintenance and protection after the sand table model is made. Today we will introduce this in detail.
1. After the completion of the model, the model manufacturing company should assign a special person to carry out the transportation work. Before the transportation, the special glass cover mentioned above should be used. After the model is transported to the site and installed by the model company, and the light is debugged, it can be used normally, so as to avoid unnecessary trouble in the later stage!
2. Each model has a remote control. The remote control of the sand table model must be carefully kept, not lost, and not used frequently, or it will easily cause the failure of the remote control circuit. Do not throw, throw, or let children play as toys.
3. The position where the sand table model is placed should be kept clean, ventilated, and free from wind and sun. The model without glass cover should be cleaned frequently, and a special dust blower should be used to blow dust regularly. The model shall be guarded by a specially assigned person and shall not be touched by children to prevent damage or electric shock.
4. The temperature at the place where the sand table model is placed shall not exceed 35 ℃, and shall be kept at 30% to 80% relative humidity, otherwise the sand table model will be easily degummed and deformed. Do not allow direct sunlight, let alone exposure to the sun. Avoid exposure to the wind and the sun!
5. Although the exquisite light of the sand table is easy to attract people's attention, the light of the sand table model should not be open for a long time, and should be turned off every two to three hours. If there is a real water fountain, the sand table model should always check whether there is water (because the water is constantly evaporating). If the water is insufficient, water should be added in time. Once the fountain does not spray, the power switch should be closed immediately, Failure to do so may result in damage.
6. If it is necessary to transfer or disassemble, please contact the customized model company to have someone disassemble it for you; In case of transfer, please protect the model with plexiglass cover!
