You know Building model What details should be paid attention to when making water surface in?
It is one of the landscapes that often appear in the water surface sand table model. Different sand table models make different water surfaces. Usually, the water surface model is made according to the style and scale of the building sand table model. So, how is the water surface in the building model made? Now let's have a look.
1. Use a large proportion of Building model production When it comes to water surface, the height difference between water surface and road surface should be considered.
The usual practice is to first deal with the leakage of the chassis water surface, and then stick a transparent plexiglass plate or a textured transparent plastic plate at the leakage point according to the design height difference, and spray the following colors on the transparent plate with blue. Using this method to express the water surface, on the one hand, it can express the height difference between the water surface and the perch; On the other hand, the transparent board has a very good simulation effect under the sunlight and the bottom blue paint.

2. When making the water surface with a small scale building model, the height difference between the water surface and the road surface can be ignored.
When making, you can directly use blue paper strips to cut according to their shapes. After clipping, paste according to its position. In addition, shadow method can also be used for processing. The method is to paste the shielding film on the water surface first, and then leak. Spray blue self paint after carving. After the paint is completely dry, peel off the shielding film.
In building models, water surface is formed in many ways. In order to better show the real effect of building sand table models, many models are made by simulating dynamic water.